Before applying Belka on glass, clean the surface, and make sure that there is not any oil or grease on it.

Tempered Glass, Lattice Glass, Porous Glass, Normal Glass, Mirror, Reflex Glass, Window Glass

Before applying Belka on tiles and ceramics, clean the surface, and make sure that there is not any oil or grease on it.

Glazed, ceramic tiles, Porcelain tile, Glass tile, Cement tile, Marble tile, Mosaic tile, Granite tile, Limestone tile, Travertine tile, Metal tile..

To cover this kind of surface with Belka, you usually need more Belka material to reach a flat surface. The amount of material used depends on the surface and the cavities.

Burnt clay brick, Fly ash brick, concrete brick, engineering brick, Sand lime or Calcium silicate brick, etc…

To prevent penetration of water, first, use an oil-based paint on the surface, then apply Belka.

Plywood, Densified wood, Fiberboard, Particleboard, laminated timber, laminated veneer, Cross-laminated, etc…

Soft Cement Surfaces are appropriate for applying Belka and don’t need any substructure. (In case of old and rotten cement surfaces, refer to applying Belka on Cement surfaces).

Smooth cast finish, Roughcast finish, Sand faced finish, Pebbledash finish, Scraped finish, Depeter finish, Textured finish / CRI Green Label Plus-X 0.75

Usually, on this kind of surface, the corners don’t have supervision. After the corners are ingot’d, BELKA can be applied easily.

All kind of Plaster, Gypsum, KNAF, Browning plaster, Hardwall plaster, Tough-Coat plaster, Di-Coat plaster, Multi-Finish plaster, Board- Finish plaster

Before applying Belka on a black iron surface, cover the surface with an oil-based paint to prevent corrosion.

Belka can be applied directly on the surface without any substructures. Galvanized Iron, Aluminium, Black Iron, Steel Iron, Bronze, Gold, Gunmetal, Brass, Silver, Chrome, Copper, Zinc

Coating on paint surface is possible and common. Even any oil paint surfaces are proper headstock for the application of BELKA interior wallpaper. Due to the sliding condition of oil surfaces, new smart BELKA paste should be prepared stiffer than usual.

All kinds of decorative painted surfaces can be covered with smart Belka, new interior wallpaper. Acrylic water or oil based paint surfaces are an appropriate substructure to apply Belka by Belka groups.

Coating on paint surface is possible and common. Even any oil paint surfaces are proper headstock for the application of BELKA interior wallpaper. Due to the sliding condition of oil surfaces, new smart BELKA paste should be prepared stiffer than usual.

To prevent penetration of water, first, use an oil-based paint on the surface, then apply Belka. Plywood, Densified wood, Fiberboard, Particleboard, laminated timber, laminated veneer, Cross-laminated, etc…